Showing 1793–1808 of 1909 results
-
Tongue Tie – Plain Point
Read moreTongue Tie – Plain Point
stainless steel, plain point
Grooved Director and Tongue Tie contains a plain point at one end and a butterfly-shaped director on the other end. This stainless steel instrument is typically used during a frenotomy to lift the tongue back and expose the frenulum. The frenulum would rest on the grooved part of the director and then be cut with iris scissors. Depending on the patient, this device is offered in various lengths.
-
Townley Femur Caliper
Read moreTownley Femur Caliper
4″ (10.2 cm)
Townley Femur Caliper is a measurement device intended for use in orthopedic surgical procedures. This instrument itself measures 4″ long and is crafted for use in accurate measurements of the femur. These calipers features two parallel prongs which can be situation on either side of the femur and from the markings the width of the femur can be determined.
-
Townsend Curette
Read moresmall, rounded & tapered tip, 12″ (30.5 cm) Townsend Curette is ideal for obtaining endocervical tissue samples from a stenotic os using its round tapered tip. The tip features a rectangular basket for collection of tissue. The curette is designed with a slightly thicker handle for better grip. Please note that website images are often representative of the product family and may not conform to the exact specifications or features of the item you select. The final specifications will match the description of the specific catalog item you select.
-
Tracheal Tenaculum
Read moreTracheal Tenaculum
single, 5-3/4″ (14.5 cm)
Jackson Tracheal Tenaculum is 5 ¾” in length and contains a hooked handle. The handle tapers into a single hooked point on the other end providing the purpose of lifting the tracheal incision during a tracheotomy operation. This instrument is polished to a dull, satin finish to reduce glare under operating room lights.
-
Tubing Clamps
Read moreTubing Clamps
heavy pattern, smooth jaws
Presbyterian Hospital Tubing Clamps is a heavy pattern with smooth jaws designed to be used during general surgeries were tubes containing fluid or blood need to be occluded. For example, during procedures that comprise of perfusion, blood flow may need to be briefly stopped. The locking ratchet mechanism that is on the inner ring-handles provides a tight clamp on the tube.
-
Tuttle (Singley) Tissue Forceps
Read moreTuttle (Singley) Tissue Forceps
Tuttle (Singley) Tissue Forceps are handcrafted from surgical grade German stainless steel. Designed with serrated loop tips, these grasping forceps are available in a wide selection of lengths. The tips of the blades formed as loops lying at right angles to the line of closure. The ridged handle offers a secure grip for the surgeon, while the stability pin offers a steady and precise tool.
-
Twist Drill
Read moreTwist Drill
drilling depth 8.0 mm, length 5-3/4″ (14.6 cm)
Twist Drill is a unique drilling instrument designed to create new holes to increase access to certain areas such as through the skull to the brain tissue. This instrument is crafted to distribute the force from the center of the drill point out and thus is ideal in creating new holes without the use of pilot holes. A variety of surgeries including craniotomies can benefit from a specialized drill such as this one. Additionally this instrument has a drilling depth of 8.0 mm and a length of 14.6 cm.
-
U.S. Army Pattern Chisel
Read morestraight, 6-1/4″ (16.0 cm) US Army Pattern Gouge is a specialized instrument designed for removal of specific segments of bone. This gouge is designed similarly to a chisel but the blade portion features a curvature to it allowing it to be used to scoop up segments. The opposite end of this gouge has a rounded, flat end that can be used with a mallet to increase the driving force to effectively pierce through bone. This gouge is available in three sizes 6.0 mm, 12.0 mm and 18.0 mm making them well suited for larger bones in the spinal surgery and smaller ones for more delicate work on the skull.
-
U.S. Army Pattern Gouges
Read more6-1/4″ (16.0 cm) US Army Pattern Gouge is a specialized instrument designed for removal of specific segments of bone. This gouge is designed similarly to a chisel but the blade portion features a curvature to it allowing it to be used to scoop up segments. The opposite end of this gouge has a rounded, flat end that can be used with a mallet to increase the driving force to effectively pierce through bone. This gouge is available in three sizes 6.0 mm, 12.0 mm and 18.0 mm making them well suited for larger bones in the spinal surgery and smaller ones for more delicate work on the skull.
-
U.S. Army Pattern Osteotome
Read more6-1/4″ (16.0 cm) US Army Pattern Osteotome is a versatile instrument for use in manipulating of bone. This osteotome features a straight profile and can be used to cut bone or to carve out small pieces to allow access to more difficult to reach areas. Additionally this osteotome is crafted with a chisel type blade that can be used to scrape, clean or sculpt bone for a variety of surgical procedures. This instrument is available in three sizes 6.0, 12.0 and 18.0 mm.
-
Umbilical Scissors
Read more4-1/8″ (10.5 cm) Umbilical Scissors are ideal for cutting the umbilical cord post-childbirth. The scissors feature wide, flat blades that are designed to make precise cuts to minimize tissue damage and reduce the risk for cord infections. The curved blades also reduce the chances of cord slippage. Please note that website images are often representative of the product family and may not conform to the exact specifications or features of the item you select. The final specifications will match the description of the specific catalog item you select.
-
Universal Ring Retractor
Read moreUniversal Ring Retractor
Universal Ring Retractor IMA Ratchet Mechanism contains a place to hold the handle of an IMA retractor blade and a ring for the IMA cross bar. This mechanism is mounted onto a ring retractor and helps the blades stay in place throughout the course of a surgical procedure. If this item contains defects in materials and workmanship, it is covered by the CANDID ENTERPRISES manufacturer warranty.
-
Universal Ring Retractor
Read moreUniversal Ring Retractor
Universal Ring Retractor Ratchet Twister is attached onto a ring retractor system in order to allow the set to move in multiple directions to accommodate the needs of surgery. With this feature, the surgeon has access to greater exposure of the operating area than if an individual self-retaining retractor were used. The premium quality stainless steel used for this instrument contributes to its durable and long-lasting ability.
-
Universal Ring Retractor
Read moreUniversal Ring Retractor
Universal Ring Retractor Richardson Blade is presented in various sizes, as well as a complete set, according to the type of surgery involved and the depth of the incision. This blade has a long, thin, and grooved handle with a pointed blade that is curved at a right-angle. This blade can be attached to a ring retractor system to be used for retracting subcutaneous tissue.
-
Universal Ring Retractor
Read moreUniversal Ring Retractor
Universal Ring Retractor Richardson Blade is presented in various sizes, as well as a complete set, according to the type of surgery involved and the depth of the incision. This blade has a long, thin, and grooved handle with a pointed blade that is curved at a right-angle. This blade can be attached to a ring retractor system to be used for retracting subcutaneous tissue.
-
Universal Ring Retractor
Read moreUniversal Ring Retractor Round Segmented Ring
1 pair
Universal Ring Retractor Round Segmented Ring is provided with two segments that can be connected together to form a ring-shape. This retractor can be obtained in a small, medium, or large size depending on the type of procedure being conducted. This item is also composed of operating-room grade stainless steel that makes it ideal to be used in invasive procedures and can resist multiple sterilizations.